The Irish Homeowner’s Guide to Winter Heating Oil Efficiency

The temperature has dropped, and we’re going into the coldest time of the year, so you’re likely to be using your heating regularly by now.

If you’re using home heating oil to heat your home, you might be thinking about how you can optimise your system to make the most of the oil you have bought.

The Irish Homeowner’s Guide to Winter Heating Oil Efficiency

The temperature has dropped, and we’re going into the coldest time of the year, so you’re likely to be using your heating regularly by now. If you’re using home heating oil to heat your home, you might be thinking about how you can optimise your system to make the most of the oil you have bought. 

There are many ways to use your home heating oil more efficiently, and we’re here to share our top tips and make the most of your money this winter. From bleeding your radiators to checking your tank and boiler system, we’ll take a look at how to make your tank of oil last longer and ensure that you and your family stay warm this winter. 

Optimise your Heating Oil Usage

Did you know that you can get the best performance from your home heating oil when you take a few simple steps? We recommend paying attention to your heating system itself to optimise efficiency, alongside taking measures to reduce your usage. Bleeding your radiators, optimising the way your boiler works and checking your oil tank gauges are three important places you can start – and they are all simpler than they sound! Here’s our quick guide:

 Bleeding your radiators

When air becomes trapped inside a radiator – which often happens over the summer when your heating system is not used – this prevents hot water from moving through the system properly. If your radiators need bleeding, they may heat up at the bottom but not at the top, or feel cool even though your heating system is turned on. Bleeding your radiators is a simple process, allowing the trapped air to escape from the radiator and improve the flow of hot water to keep your home warmer. 

  • Bleeding your radiators must be done when your heating system is turned off, and your radiators are cold. You will need a radiator key that fits your system, although some modern radiators can be bled using an Allen key or a screwdriver of the right size. It is useful to have a cloth and a cup or pot to catch any spurting water. 
  • Turn the key or screwdriver anti-clockwise using the bleed valve at the top of your radiator, and listen for a hissing sound as air escapes. Use the cloth or pot to catch any water that comes out. 
  • You should keep turning the valve until the water begins to flow steadily and there are no air bubbles, then tighten the valve again. 
  • Repeat this process with each radiator that is not functioning properly, and then turn your heating system on. You may need to re-pressurise your boiler if it has dropped below 1 bar, but this is also a simple process that you can almost certainly manage alone. 

Check all your radiators carefully to ensure that they are working more effectively and that the heat is distributed correctly so that the top and bottom of each radiator is hot. If your radiators are still not working well after bleeding them, you may need to seek help from a professional engineer to find out if there are any faults with your system. 

We recommend that you bleed your radiators after long breaks in usage, such as over the summer months, or every few months. This should help to keep your home heating system running effectively and ensure that your home stays warm throughout the winter.

Checking your heating oil tank gauges

Taking care of your home and your family throughout the winter means knowing that you always have enough heating oil to keep warm. You should check your oil tank gauges on a regular basis – we recommend every week during the winter – so that you can order more oil in good time. Running out of oil is a problem at any time of the year if it leaves you without hot water, but if you are stuck without heating oil during the coldest months, you may incur higher costs for emergency deliveries or be left in the cold for several days if this is not possible in your area. 

If you are relying on home heating oil to heat your home, you’ll need to be familiar with your tank and your heating system so that you can optimise the heating in your home. You may find that replacing your heating tank with a newer, bunded tank is a great way to improve the efficiency of your system, especially if your tank is very old, and this is highly recommended to prevent oil leakage, too. 

You should be aware of the capacity of your heating oil tank, and you may know that the usable capacity is a little less than this, since the oil is not drawn from the very bottom of the tank into your system. There is likely to be some settling of debris and sludge at the bottom of your tank, although this will not be problematic when you use good quality heating oil, and you can find products to help reduce this and keep your tank cleaner. 

You can check the oil level in your tank using the gauge that is fitted to your tank, which may be a mechanical float gauge, an ultrasonic monitor or a sight tube. You can also use a dipstick to check your oil level, and we recommend checking your gauge against a dipstick reading regularly. 

If you have a mechanical float gauge that sits on top of your tank, you’ll need to check that it is working by tapping the dial on the outside of the tank gently. Clean the dial first and ensure you are looking at it directly at eye level. This type of gauge is usually simple to read, and you should ensure it is clean for correct readings. If you are concerned that the dial is dropping suddenly or seems to be sticking, it may need to be repaired or replaced. 

An ultrasonic monitor uses a sensor to measure the gap between the top of your oil tank and the surface of the oil it contains, and displays this on a monitor inside your home. You will need to check that your display is correct, as you may not receive correct readings if the battery fails or the signal is lost, and your sensors may be interrupted by debris, dirt or ice. You may need to have your ultrasonic monitor reset if it is not working properly or if your tank is replaced, and you should have it serviced regularly.

A sight tube is a gauge that allows you to read the oil level from a clear tube on the outside wall of the tank, where the oil settles at the same height as the oil inside the tank. You may need to press a valve to allow the oil to fill the tube and settle before you take a reading, and you may need to clean the tube to ensure you can read it correctly. If your sight tube is stained or clouded, it may need to be replaced to ensure effective readings. 

Whichever type of gauge you use to check your heating oil level, we always recommend checking it with a dipstick. This is the most accurate option and will give you peace of mind that your gauge is working correctly. To use a dipstick, you’ll need a clean wooden rod that you can lower straight to the bottom of the tank. Lift it out gently and measure the line to check how much oil you have. Ask your heating engineer for tips on your particular system, and remember that regular monitoring is essential, especially in times of high usage. 

Optimising your boiler efficiency

You’ll optimise the efficiency of your boiler when you take good care of it, so keeping the outside of it clean and free of dust is a great place to start. To keep the inside of your boiler in great condition, you’ll need to have it serviced routinely – usually annually – and it’s a good idea to ensure that you book this in long before the cold weather sets in. 

Improving the insulation around your boiler and in your home can make a big difference to your efficiency, and turning your thermostat down can improve efficiency and save you money. If you have a very old boiler, you may find that you can make significant savings and keep your home warmer by replacing your boiler with a newer model, and this can be a great investment in your home and your future. 

Quality Home Heating Oil in Ireland

At East Cork Oil, we supply fuel solutions for your home, your business and your vehicles, including the latest greener fuel options. Our friendly team can help you find options to suit your lifestyle and your budget, and we offer payment plans so that you can spread the cost of your fuel throughout the year. 

Contact us at East Cork Oil for high-quality home heating oil, business fuel and agricultural diesel in the Southern Counties of Ireland.

Written by redazione

7 Energy Saving Tips to Keep Your Home Cosy This Winter